Copyright © 2020 Tontech Standard Nigeria Enterprise. All Rights Reserved.
₦3,152.37
CompareBlack&blue =black with blue light
Black&red =black with red light
Silver&blue =silver with blue light
Silver&red =silver with red light
Every color have 2 size about Dial(Width):2.5cm/2.1cm
1cm=0.394 inch
Japanese-inspired red LED digital watch.Top and bottom row LED lights for time and date display.
Fashion, exclusive fold over lock design.
Time and Date function.
This size is more suitable for Man/Boy.
Watch Dial Size: 5.0×2.5/2.1×1.1cm(LxWxH)
Wristlet Size: 185 mm with 18 segments for wrist adjustment
Item Size: length 21cm Width 2.4cm
Screen: Top and bottom row LED lights for time and date display
Clasp: Exclusive fold over lock design
This watch is not waterproof
Power: CR2016 (x1) pre-installed, please change the batteries when the luminosity is too weak.
Led Watch Instruction Manual:
1.Power:
Insert one CR2032 battery to power the device.
Change the batteries when the luminosity is too weak.
2.Reading Time,Date,Seconds:
1)Press the button A once The upper two characters display from 0 to 23 hours. The lower two characters display from 1 to 59 minutes.
2)Press the button A twice The upper two characters display from 1 to 12 months. The lower two characters display from 1 to 31 days.
3)Press the button A three times The lower two characters display the seconds
3.Setting Hour,Minute.Month,Day,Year,12Hr/24Hr Mode:
Push the button A to display Time,then push the button B to enter set mode (hours are flashing). Press button A to set the hours.Push the button B to confirm the hour and to cnange to the miuntes(flashing).
Prsss button A to set the minutes.Push the button B to confirm the minutes and to change to the month(flashing).
Press button A to set the month.Push the button B to confirm the month and to change to the days(flashing).
Press button A to set the days.Push the button B to confirm the days and to change to the year(flashing).
Press button A to set the year.Push the button B to confirm the year and to change to the i2Hr/24Hr Mode(flashing).
Press button A to set the 12Hr/24Hr Mode.Push the button B to confirm the 12Hr/24HrMode.
4. Battery advice:
Replacement of battery/ batteries (we recommend by the trade). Please replace the batteries as follows:
Remove the screws on the back of the watch case and/or open the watch case.
If necessary lift the metal clip that fixes the batteries at end with a thin pointed tweezers or screwdriver and remove it.
Replace the batteries considering the polarity. Close the watch case and if necessary tighten the screws.
Quantity: 1PC
Note:
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!!
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.