Inverter DC 12v To 110v 220v 280v 150W DC-AC Module Inverse Converter Booster Module Voltage Power Regulator Power Supply

Description

Inverter DC 12v To 110v 220v 280v 150W DC-AC Module Inverse Converter Booster Module Voltage Power Regulator Power Supply

Features :

Solder-free, the input terminal adopts 7.62 terminal block

High frequency AC output uses blue 301 terminal, DC output 7.62 terminal

The voltage can be selected arbitrarily, through the jumper cap, no welding required

The output power is large. If there is a fan for heat dissipation, this board can output 200W power. Double-sided circuit board is used.

AC output can be connected to voltage doubler rectification, or purely resistive load

Product parameters:

High-frequency AC output port: only suitable for resistive loads, such as ordinary household incandescent bulbs (tungsten filament bulbs), ordinary electric soldering irons, or connected to voltage doubler rectifier circuits. Do not measure this output port when measuring the output voltage, because these voltmeters are designed to The 50Hz household voltage is measured, not the high-frequency voltage, and there will be huge measurement errors.

DC output port: You can use a multimeter to measure the voltage with a DC gear, and you can use a switching power supply load (electrical appliances marked with an input voltage of AC100-240V can be used), and a resistive load. 150W inverter battery DC12V step-up to AC220V step-up transformer power conversion circuit board.

Switch: The red line and black line on the board are switches, which are used to control the presence or absence of high voltage output.

Input voltage: 12V, the minimum input voltage is 8V, and the maximum input voltage is 14.8V. Since there is no input fuse on this board, please add a fuse yourself. It is recommended to add a 15A fuse (powered by lithium battery and switching power supply, DC power supply, which will cause the tube to overheat and burn when the power supply is insufficient). The output voltage is unstable. The input should ensure sufficient power (current), otherwise it is easy to burn the tube.

Output voltage: 110V 200V 220V 280V

Output waveform: high frequency square wave or DC (unfiltered)

Output power: 150W (100W or more, please add a fan to dissipate heat)

No-load 12V terminal current: 250mA

Working frequency: 27KHZ

Protection: no protection, please add fuse yourself

Features: No welding, 7.62 terminal for input, blue 301 terminal for high-frequency AC output, 7.62 terminal for DC output (directly loosen the screw on the top of the terminal, insert the wire, and tighten the screw)

The voltage can be selected arbitrarily, through the jumper cap, no welding required

The output power is large. If there is a fan for heat dissipation, this board can output 200W power and adopt a double-sided circuit board.

AC output: can be connected to voltage doubler rectification, or purely resistive load

Output voltage: marked on the circuit board

Precautions:

Available electrical appliances: Switching power supply loads, generally electrical appliances marked with an input voltage of 100-240V can generally be used, such as non-cottage mobile phone chargers, set-top boxes, DVDs, LED lights (with constant current drive, so some can be used, Some LED lamps cannot be used. When using them, they can only be connected to the DC output port, and must not be connected to the high-frequency AC output port.) Ordinary tungsten filament bulbs, small electric drills, energy-saving lamps, and ordinary non-temperature-adjusting electric soldering irons require high voltage doubler The rectifier circuit, the LCD TV is connected to the DC output port, etc.

Unusable electrical appliances: iron-core transformers, such as speakers using iron-core transformers, temperature-adjusting electric soldering irons, dimming lamps, AC motor loads such as electric fans. Cheap RC step-down LED lamps (such as LED night lights, straw hat LED lamps, LED lamps with plastic shells)

Package list:

Inverter X 1