Note! The machine will have a built-in battery and a protective device. After receiving it, please follow the picture below to remove the protective insulation sticker. Countries that do not support charged delivery will not provide batteries to send good.

Battery soldering iron                  soldering iron tip

Input voltage:3.7V-4.2V            resistance:2.0-3.6Ω

power supply: 8W                        Tin melting time:<15s

temp range:300°C~450°C            Cooling down:<30s

Power supply: 18650                    Charging access: type-cImportant 

Charging voltage 5V                        Starting current 2A

safety instructions and warnings

1.1 The soldering iron uses 18650 batteries, please do not connect the positive and negative levels.

1.2 Please do not use the soldering iron on a live circuit.

1.3 Do not let the machine enter or soak in water.

1.4 The temperature of the soldering iron tip will become higher during use, please do not touch it with your hands.

1.5 Because the tip of the soldering iron is very sharp, please keep the tip to prevent accidents.

1.6 Please do not approach flammable materials

1.7 To prevent malfunctions, please do not use the specified external voltage

1.8 To prevent battery leakage or fire, please take out the battery when not in use for a long time

Troubleshooting

1. Start the button for a few seconds and stop heating, The indicator light is off, please replace the battery with sufficient power or charge the battery.

2. When the indicator light is on, the welding head is not hot, please replace with a new welding head.

3. Press the indicator light to quickly turn off, and check whether the line is short-circuited.

Notice!

The soldering iron does not ship with batteries, you need to buy it yourself. Model: 18650 rechargeable battery, the capacity needs to be more than 2000 to drive

Drive mode includes: power supply line 18650 battery (sold separately)

Single battery-free drive requires the power supply to meet 5V2a or above to drive. The red light indicates charging. The battery is fully charged and the green light indicates the charging function. Do not use it for a long time to avoid overheating

standard

Host *1

Charging cable *1

C Welding head *1

Battery *1 (2800mAh)

Y-shaped support *1

Instruction Manual *1

Enhanced

Host *1

Charging cable *1

Solder *1

C Welding head *1

K welding head *1

Battery *1 (2800mAh)

Y-shaped support *1

Instruction Manual *1